Proper application is critical to antimicrobial coating performance and longevity. Follow this 5-phase process from assessment through quality verification to ensure optimal results.
Phase 1: Pre-Application Assessment
Catalog all surfaces for coating treatment, assess surface cleanliness and damage, and develop detailed application schedule.
Phase 2: Surface Preparation
Remove loose dirt and debris, eliminate oils and waxes using degreasing agents, deep clean with pH-neutral cleaners, rinse and allow surfaces to dry completely.
Phase 3: Coating Application
Configure HVLP spray gun, maintain consistent 6-8 inch distance with 50% overlap, apply 2-3 thin coats to manufacturer-specified thickness (2-4 mils wet).
Phase 4: Curing and Drying
Surface dry to touch in 1-2 hours. Allow 24-72 hours full cure time. Maintain stable temperature (60-80°F) and humidity (30-60%) during curing.
Phase 5: Quality Verification
Visual inspection for uniform coverage, coating thickness measurement, cross-hatch adhesion testing, baseline ATP testing for future comparison.
Conclusion
Professional application ensures coatings deliver maximum antimicrobial effectiveness and longevity while protecting your investment in advanced surface protection.